Paul Wegner Coating Blades – the result of continuous technical development!
Since many years the customers and partners belief in the high qualities and strong controlling measures of Paul Wegner coating blades. Optimal coating and satisfied customers are our aspiration.
Please take further technical facts from our datasheet at the end of the page.
Alloy No.:
1.1274 (AISI 1095)
Description:
C 100 S
Hardness:
HRC: 52 – 55
HV: 550 – 600
Tensile strength:
1800 – 2000 N/mm²
Length:
after your specification
Standard width in mm:
20 – 200
Standard thickness in mm:
0.25 / 0.305 / 0.381 / 0.40 / 0.457 / 0.508 / 0.60 / 0.635
Surface:
blue polished
Angle degree:
like your specification
Alloy No.:
1.1274 (AISI 1095)
Description:
C 100 S
Hardness:
HRC: 52 – 55
HV: 550 – 600
Tensile strength:
1800 – 2000 N/mm²
Length:
after your specification
Standard width in mm:
20 – 100
Standard thickness in mm:
0.25 / 0.305 / 0.381 / 0.40 / 0.457 / 0.508 / 0.60 / 0.635
Surface:
greyish blue
Angle degree:
like your specification
Alloy No.:
1.1274 (AISI 1095)
Description:
C 100 S
Hardness:
HRC: 52 – 55
HV: 550 – 600
Tensile strength:
1800 – 2000 N/mm²
Length:
after your specification
Standard width in mm:
20 – 200
Standard thickness in mm:
0.25 / 0.305 / 0.381 / 0.40 / 0.457 / 0.508 / 0.60 / 0.635
Surface:
bright polished
Angle degree:
like your specification
Alloy No.:
1.4310 (AISI 301)
Description:
X10CrNi18-8
Hardness:
HRC: 46 – 49
HV: 460 – 500
Tensile strength:
1500 – 1700 N/mm²
Length:
after your specification
Standard width in mm:
20 – 200
Standard thickness in mm:
0.25 / 0.305 / 0.40 / 0.457 / 0.508 / 0.60
Surface:
bright
Angle degree:
like your specification
Please note the following packaging references.
Our datasheet: Coating Blades
(09/2015)